XIRI Light Energy Limited Corporation a manufacturer specialized in the research, maining engage in manufacturing Pretreatment System in Taiwan, development and production of Moulds. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.

Pretreatment System

XIRI Light Energy Limited Corporation
To find and shop the best Pretreatment System, you need to know about the highest quality of Pretreatment System manufacturer, supplier, wholesaler, and distributor, OEM and ODM from a factory in Taiwan
1-1-1
none
999999999 http://schema.org/InStock USD 2020-12-31
90out of 100based on 100user ratings
Condensing system Technical introduction The condenser is used to separate the condensable components in the organic waste gas. At present, it is mainly used for flue gas cooling and recovery of saturated flue gas moisture, reducing flue gas moisture content, and recovering more valuable solvents in waste. It is not only through the condensation method to meet the compliance problem of waste emissions. In the purification of organic waste gas treatment, the use of condenser is mainly to recover the solvent, and as a pretreatment process of organic waste gas purification. The process of changing from the vapour state to the liquid state is often called condensation. The working principle of the condenser is: According to the nature of the substance with different saturated vapour pressures at different temperatures, by cooling or heating, the partial pressure of the organic components in the exhaust gas is equal to the saturated vapour pressure at that temperature, then the organic components Condensed into liquid and separated from the gas phase. The usual saying is: Under certain pressure, when the temperature of gas reaches below the dew point, it condenses into a liquid. The effect of the condenser mainly depends on the relationship between the vapour pressure of the VOC and the temperature ˇ. The condenser is composed of the main body of the heat exchanger, the water circulation pipeline, the temperature and pressure measuring points, and the control system. The condenser is a vapour-water heat exchanger. The condensed water circulates inside the heat exchange tube through the water circulation system. The flue gas moves countercurrent with the water flow outside the heat exchange tube. The circulating water absorbs heat and the flue gas releases heat to achieve flue gas cooling. The superheated water vapour is condensed into liquid water at low temperature, thereby releasing the latent heat of vaporization, thereby achieving temperature reduction and water recovery.
XIRI Light Energy Limited Corporation
To find and shop the best Pretreatment System, you need to know about the highest quality of Pretreatment System manufacturer, supplier, wholesaler, and distributor, OEM and ODM from a factory in Taiwan
1-1-2
none
999999999 http://schema.org/InStock USD 2020-12-31
90out of 100based on 100user ratings
Purification tower Technical introduction The basic principle is to use the contact between gas and liquid to combine The pollutants in the gas are captured in the liquid, and then the clean gas is separated from the contaminated liquid to achieve the purpose of purifying the air. After the granular pollutants in the air flow contact the washing liquid, the droplets or liquid film diffuse and adhere to the gas, or humidify the particles, so that the particles can be separated and removed by gravity and inertial force. The gaseous pollutants are transported into the scrubbing liquid through turbulent flow, molecular diffusion and other phenomena such as mass transfer and chemical reactions to achieve the purpose of separating from the incoming gas.
XIRI Light Energy Limited Corporation
To find and shop the best Pretreatment System, you need to know about the highest quality of Pretreatment System manufacturer, supplier, wholesaler, and distributor, OEM and ODM from a factory in Taiwan
1-1-3
none
999999999 http://schema.org/InStock USD 2020-12-31
90out of 100based on 100user ratings
Electric detarring precipitator (The ionization catcher) Technical introduction The Electric detarring precipitator can catch tar, with high efficiency, small resistance loss, and large gas processing capacity. It can not only guarantee the gas quality requirements of subsequent processes. Increase the product recovery rate and significantly improve the operating environment. It is widely used in chemical, coking, city gas, building materials, metallurgy, ceramics and other industrial enterprises. The design structure of our company is tubular Electric detarring precipitator. When the flue gas passes through the Electric detarring precipitator, the dust and tar in the flue gas are ionized under the action of electric charge, move to the charged metal wire and tube wall, and lose the charge, and fall to the Electric detarring precipitator under the action of gravity The bottom flows out, so that the pollutants can be degraded and removed. Application field Oily and paraffin exhaust gas in the production line of the plastics industry. Tar-containing fumes from asphalt waterproof linoleum production line. Tar exhaust gas from foaming and vulcanization production lines in the rubber industry. Oily exhaust gas discharged from plastic printing and dyeing machines in the textile printing and dyeing industry. Organic waste gas discharged from the washing machine and pellet extruder in the plastic recycling industry. Volatile exhaust gas from printing, inkjet, and paint industries. It is mainly used for gas purification in industries such as asphalt, rubber, fertilizer, coking, city gas, metallurgy, building materials, carbon, ceramics, etc. At the same time, it removes tar, dust, water mist and other impurities to achieve the dual effects of material recovery and gas purification. It also plays a vital role in ensuring the normal and stable operation of the equipment in the rear section of the process. In addition, it is mainly used as a pretreatment device for comprehensive organic waste gas treatment.
XIRI Light Energy Limited Corporation
To find and shop the best Pretreatment System, you need to know about the highest quality of Pretreatment System manufacturer, supplier, wholesaler, and distributor, OEM and ODM from a factory in Taiwan
1-1-4
none
999999999 http://schema.org/InStock USD 2020-12-31
90out of 100based on 100user ratings
Dry filter Technical introduction The dry filter adopts imported special dry paint mist filter material as the core component. The paint mist filter material is specially processed by glass fibre wire and is bonded and formed under the control of a computer program. There is a certain gradient in the density of each layer during moulding to eliminate. the paint mist is blocked on the surface of the filter material. The paint mist accumulates uniformly in the gaps between the layers of fibres so that the entire material space is fully utilized. The paint mist particles are contained in the material under the action of interception, collision, and absorption, and gradually weathered into powder shape, so as to achieve the purpose of purifying paint mist. The material can be reused many times after being taken out and beat cleaned.
All the staff will serve the old and new customers with best

Pretreatment System

and the best service. Your satisfaction is our satisfaction,we welcome and appreciate your suggestion and feedback on how we can serve you better. Looking forward to having good business relationship with you soon!!